This guide provides detailed instructions for installing Windows Server Update Services 3.0 SP2 (WSUS 3.0 SP2) using either Windows Server Manager or the WSUSSetup.exe file. This guide also contains basic setup instructions for WSUS 3.0 SP2 using either Windows Server Manager or the WSUS Server Configuration Wizard.
Copyright Notice Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted in examples herein are fictitious. No association with any real company, organization, product, domain name, e-mail address, logo, person, place, or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. © 2009 Microsoft Corporation. All rights reserved. Microsoft, Active Directory, ActiveX, Authenticode, Excel, InfoPath, Internet Explorer, MSDN, Outlook, Visual Studio, Win32, Windows, Windows Server, and Windows Vista are trademarks of the Microsoft group of companies. All other trademarks are property of their respective owners.
Contents
Windows Server Update Services 3.0 SP2 Step By Step Guide ................................................... 5
Additional References .............................................................................................................. 5
Step 1: Confirm WSUS 3.0 SP2 Installation Requirements .......................................................... 5
Server Hardware and Software Requirements for Installing WSUS 3.0 SP2 ............................. 6
Client Software Requirements .................................................................................................. 6
Permissions ............................................................................................................................. 6
Preparing to Install WSUS 3.0 SP2 .......................................................................................... 6
Next Step ................................................................................................................................ 7
Additional Resources ............................................................................................................... 7
Step 2: Install WSUS Server or Administration Console ............................................................... 7
If You Are Using Server Manager ............................................................................................. 8
If You Are Using the WSUSSetup.exe File ............................................................................... 8
Using the WSUS 3.0 SP2 Setup Wizard ................................................................................... 8
Next Step ............................................................................................................................... 11
Additional Resources ............................................................................................................. 11
Step 3: Configure the Network Connections............................................................................... 11
Next Step ............................................................................................................................... 14
Additional Resources ............................................................................................................. 15
Step 4: Configure Updates and Synchronization ........................................................................ 15
Step 4 Procedures ................................................................................................................. 15
If You Are Using the Windows Server Update Services Configuration Wizard ......................... 15
If You Are Using the WSUS Administration Console ............................................................... 17
Next Step ............................................................................................................................... 18
Additional Resources ............................................................................................................. 18
Step 5: Configure Client Updates............................................................................................... 18
Step 5 Procedures ................................................................................................................. 19
Next Step ............................................................................................................................... 20
Additional Resources ............................................................................................................. 20
Step 6: Configure Computer Groups .......................................................................................... 20
Step 6 Procedures ................................................................................................................. 21
Next Step ............................................................................................................................... 21
Additional Resources ............................................................................................................. 21
Step 7: Approve and Deploy WSUS Updates............................................................................. 22
Step 7 Procedures ................................................................................................................. 22
Additional resources............................................................................................................... 23
5
Windows Server Update Services 3.0 SP2 Step By Step Guide
Windows Server Update Services 3.0 Service Pack 2 (WSUS 3.0 SP2) provides a comprehensive solution for managing updates to your network. This guide provides instructions for the basic installation and deployment tasks by using WSUS 3.0 SP2 on your network. This guide contains the following sections:
Step 1: Confirm WSUS 3.0 SP2 Installation Requirements
Step 2: Install WSUS Server or Administration Console
Step 3: Configure the Network Connections
Step 4: Configure Updates and Synchronization
Step 5: Configure Client Updates
Step 6: Configure Computer Groups
Step 7: Approve and Deploy WSUS Updates
Additional References
WSUS 3.0 SP2 is a feature-rich update management solution. For complete information about installing and using WSUS, refer to the following Web sites:
The WSUS Deployment Guide at http://go.microsoft.com/fwlink/?LinkId=139832.
The WSUS Operations Guide at http://go.microsoft.com/fwlink/?LinkId=139838.
The WSUS Release Notes at http://go.microsoft.com/fwlink/?LinkId=139840.
Step 1: Confirm WSUS 3.0 SP2 Installation Requirements
Before you install or upgrade to Windows Server Upgrade Services 3.0 Service Pack 2 (WSUS 3.0 SP2), confirm that both the server and the client computers meet the WSUS 3.0 SP2 system requirements and confirm that you have the necessary permissions to complete the installation.
6
Server Hardware and Software Requirements for Installing WSUS 3.0 SP2
1. Confirm that the server meets the WSUS 3.0 SP2 system requirements for hardware, operating system, and other required software. System requirements are listed in the WSUS 3.0 SP2 Release Notes at http://go.microsoft.com/fwlink/?LinkId=139840. If you are using Server Manager to install the WSUS 3.0 SP2 Server, you can confirm that you meet the software requirements by following the steps in the “Preparing to Install WSUS 3.0 SP2” section. 2. If you install roles or software updates that require you to restart the server when installation is complete, then restart the server before you install WSUS 3.0 SP2.
Client Software Requirements
Automatic Updates is the client of WSUS 3.0. Automatic Updates has no hardware requirements other than being connected to the network.
1. Confirm that computer on which you are installing Automatic Updates meets the WSUS 3.0 SP2 system requirements for Client computers. System requirements are listed in the WSUS 3.0 SP2 Release Notes at http://go.microsoft.com/fwlink/?LinkId=139840. 2. If you install software updates that require you to restart the computer, restart it before you install WSUS 3.0 SP2.
Permissions
The following permissions are required for the specified users and directories: 1. The NT Authority\Network Service account must have Full Control permission for the following folders so that the WSUS Administration snap-in displays correctly: %windir%\Microsoft .NET\Framework\v2.0.50727\Temporary ASP.NET Files %windir%\Temp 2. Confirm that the account that you plan to use to install WSUS 3.0 SP2 is a member of the Local Administrators group.
Preparing to Install WSUS 3.0 SP2
If you are running Windows 7 or Windows Server 2008 SP2, you can install WSUS 3.0 SP2 from Server Manager. If you are using another supported operating system, or installing only the WSUS Administration Console, go to the next section of this guide to install WSUS 3.0 SP2 by using the WSUSSetup.exe file.
1. Log on to the server on which you plan to install WSUS 3.0 SP2 by using an account that
To prepare to install the WSUS 3.0 SP2 Server by using Server Manager
7
is a member of the Local Administrators group. 2. Click Start, point to Administrative Tools, and then click Server Manager. 3. In the right side pane of the Server Manager window, in the Roles Summary section, click Add Roles. 4. If the Before You Begin page appears, click Next. 5. On the Select Server Roles page, confirm that Application Server and Web Server (IIS) are selected. If they have been selected, use the remainder of this step to confirm that the required role services are selected. Otherwise, install Application Server and Web Server (IIS) as follows. a. On the Select Server Roles page, select Application Server and Web Server (IIS). Click Next. b. If you are installing Application Role Services, on the Application Server page, click Next. On the Application Server Role Services page, accept the default settings, and then click Next. c. If you are installing Web Server IIS, on the Web Server (IIS) page, click Next. On the Web Server (IIS) Role Services page, in addition to the default settings, select ASP.NET, Windows Authentication, Dynamic Content Compression, and IIS 6 Management Compatibility. If the Add Roles Wizard window appears, click Add Required Role Services. Click Next. d. On the Confirm Installation Selections page, click Install. e. On the Installation Results page, confirm that an “Installation succeeded” message appears for the role services that you installed in this step, and then click Close.
Next Step
Step 2: Install WSUS Server or Administration Console
Additional Resources
Windows Server Update Services 3.0 SP2 Step By Step Guide
Step 2: Install WSUS Server or Administration Console
After you make sure that the server meets the minimum system requirements and that the necessary account permissions were granted, you are ready to install Windows Server Upgrade Services 3.0 Service Pack 2 (WSUS 3.0 SP2). Start the installation of WSUS 3.0 SP2 by using the applicable procedure for your operating system and kind of installation (by using either Server Manager or the WSUSSetup.exe file).
8
If You Are Using Server Manager
1. Log on to the server on which you plan to install WSUS 3.0 SP2 by using an account that is a member of the local Administrators group. 2. Click Start, point to Administrative Tools, and then click Server Manager. 3. In the right side pane of the Server Manager window, in the Roles Summary section, click Add Roles. 4. If the Before You Begin page appears, click Next. 5. On the Select Server Roles page, select Windows Server Update Services. 6. On the Windows Server Update Services page, click Next. 7. On the Confirm Installation Selections page, click Install. 8. When the WSUS 3.0 SP2 Setup Wizard is started, skip the next section and see the “To continue installing WSUS 3.0 SP2” procedure.
If You Are Using the WSUSSetup.exe File
1. Log on to the server on which you plan to install WSUS 3.0 SP2 by using an account that is a member of the Local Administrators group. 2. Double-click the WSUSSetup.exe installer file. 3. When the Windows Server Update Services 3.0 SP2 Setup Wizard is started, see the “To continue installing WSUS 3.0 SP2” procedure.
Using the WSUS 3.0 SP2 Setup Wizard
The WSUS Setup Wizard is launched from Server Manager or from the WSUSSetup.exe file.
1. On the Welcome page of the Windows Server Update Services 3.0 Setup Wizard, click Next. 2. On the Installation Mode Selection page, select Full server installation including Administration Console if you want to install the WSUS server on this computer, or Administration Console only if you want to install the administration console only. 3. On the License Agreement page, read the terms of the license agreement, click I accept the terms of the License agreement, and then click Next.
4. You can specify where clients get updates on the Select Update Source page of the
To start the installation of WSUS 3.0 SP2 Server by using Server Manager
To start the installation of WSUS 3.0 SP2 Server or the WSUS 3.0 SP2 Administration Console by using the WSUSSetup.exe file
To continue installing WSUS 3.0 SP2
9
installation wizard. By default, the Store updates locally check box is selected and updates will be stored on the WSUS server in the location that you specify. If you clear the Store updates locally check box, client computers obtain approved updates by connecting to Microsoft Update. Make your selection, and then click Next.
5. On the Database Options page, select the software that is used to manage the WSUS 3.0 database. By default, the installation wizard offers to install Windows Internal Database. If you do not want to use Windows Internal Database, provide an instance of Microsoft SQL Server for WSUS to use by selecting Use an existing database on this server or Use an existing database server on a remote computer. Type the instance name in the applicable box. The instance name should appear as
10
6. If you have opted to connect to a SQL Server, on the Connecting to SQL Server Instance page, WSUS will try to connect to the specified instance of SQL Server. When it has connected successfully, click Next to continue. 7. On the Web Site Selection page, specify the Web site that WSUS will use. If you want to use the default Web site on port 80, select Use the existing IIS Default Web site. If you already have a Web site on port 80, you can create an alternate site on port 8530 or 8531 by selecting Create a Windows Server Update Services 3.0 SP2 Web site. Click Next.
11
8. On the Ready to Install Windows Server Update Services page, review the selections, and then click Next. 9. The final page of the installation wizard will let you know if the WSUS installation completed successfully. After you click Finish the configuration wizard will start.
Next Step
Step 3: Configure the Network Connections
Additional Resources
Windows Server Update Services 3.0 SP2 Step By Step Guide
Step 3: Configure the Network Connections
After you install Windows Server Update Services 3.0 Service Pack 2 (WSUS 3.0 SP2), the configuration wizard will launch automatically. You can also run the wizard later through the Options page of the WSUS Administration Console.
12
Before you start the configuration process, be sure that you know the answers to the following questions: 1. Is the server's firewall configured to allow clients to access the server? 2. Can this computer connect to the upstream server (such as Microsoft Update)? 3. Do you have the name of the proxy server and the user credentials for the proxy server, if you need them? By default, WSUS 3.0 SP2 is configured to use Microsoft Update as the location from which to obtain updates. If you have a proxy server on the network, you can configure WSUS 3.0 SP2 to use the proxy server. If there is a corporate firewall between WSUS and the Internet, you might have to configure the firewall to ensure that WSUS can obtain updates.
Note Although Internet connectivity is required to download updates from Microsoft Update, WSUS offers you the ability to import updates onto networks that are not connected to the Internet. Step 3 contains the following procedures: Configure your firewall. Specify the way this server will obtain updates (either from Microsoft Update or from another WSUS server). Configure proxy server settings, so that WSUS can obtain updates.
If there is a corporate firewall between WSUS and the Internet, you might have to configure that firewall to ensure WSUS can obtain updates. To obtain updates from Microsoft Update, the WSUS server uses port 80 for HTTP protocol and port 443 for HTTPS protocol. This is not configurable. If your organization does not enable port 80 or port 443 to be open to all addresses, you can restrict access to only the following domains, so that WSUS and Automatic Updates can communicate with Microsoft Update: http://windowsupdate.microsoft.com http://*.windowsupdate.microsoft.com https://*.windowsupdate.microsoft.com http://*.update.microsoft.com https://*.update.microsoft.com http://*.windowsupdate.com http://download.windowsupdate.com http://download.microsoft.com http://*.download.windowsupdate.com http://wustat.windows.com
To configure your firewall
13
http://ntservicepack.microsoft.com
Note These instructions about how to configure the firewall are meant for a corporate firewall positioned between WSUS and the Internet. Because WSUS initiates all of its network traffic, you do not have to configure Windows Firewall on the WSUS server. Although the connection between Microsoft Update and WSUS requires ports 80 and 443 to be open, you can configure multiple WSUS servers to synchronize with a custom port. The next two procedures assume that you are using the Configuration Wizard. In a later section in this step, you will learn how to start the WSUS Administration snap-in and configure the server through the Options page.
1. From the configuration wizard, after joining the Microsoft Improvement Program, click Next to select the upstream server. 2. If you choose to synchronize from Microsoft Update, you are finished with the Options page. Click Next, or select Specify Proxy Server from the navigation pane. 3. If you choose to synchronize from another WSUS server, specify the server name and the port on which this server will communicate with the upstream server. 4. To use SSL, select the Use SSL when synchronizing update information check box. In that case the servers will use port 443 for synchronization. (Make sure that both this server and the upstream server support SSL.) 5. If this is a replica server, select the This is a replica of the upstream server check box. 6. At this point, you are finished with upstream server configuration. Click Next, or select Specify proxy server from the left navigation pane.
1. On the Specify Proxy Server page of the configuration wizard, select the Use a proxy server when synchronizing check box, and then type the proxy server name and port number (port 80 by default) in the corresponding boxes. 2. If you want to connect to the proxy server by using specific user credentials, select the Use user credentials to connect to the proxy server check box, and then type the user name, domain, and password of the user in the corresponding boxes. If you want to enable basic authentication for the user connecting to the proxy server, select the Allow basic authentication (password is sent in cleartext) check box. 3. At this point, you are finished with proxy server configuration. Click Next to go to the next page, where you can start to set up the synchronization process.
The following two procedures assume that you are using the WSUS Administration snap-in for configuration. These two procedures show how to start the WSUS Administration snap-in and configure the server from the Options page.
To specify the way this server will obtain updates
To configure proxy server settings
14
To start the WSUS Administration Console, click Start, point to All Programs, point to Administrative Tools, and then click Windows Server Update Services 3.0.
Note In order to use all the features of the console, log on as a member of either the WSUS Administrators or the Local Administrators security groups on the server on which WSUS is installed. Members of the WSUS Reporters security group have read-only access to the console.
1. On the WSUS console, click Options in the left pane under the name of this server, and then click Update Source and Proxy Server in the middle pane. A dialog box will be displayed with Update Source and Proxy Server tabs. 2. In the Update Source tab, select the location from which this server will obtain updates. If you choose to synchronize from Microsoft Update (the default), you are finished with this wizard page. 3. If you choose to synchronize from another WSUS server, you have to specify the port on which the servers will communicate (the default is port 80). If you select a different port, you should ensure that both servers can use that port. 4. You may also specify whether to use SSL when synchronizing from the upstream WSUS server. In that case, the servers will use port 443 to synchronize from the upstream server. 5. If this server is a replica of the second WSUS server, select the This is a replica of the upstream server check box. In this case all updates must be approved on the upstream WSUS server only. 6. In the Proxy server tab, select the Use a proxy server when synchronizing check box, and then type the proxy server name and port number (port 80 by default) in the corresponding boxes. 7. If you want to connect to the proxy server by using specific user credentials, select the Use user credentials to connect to the proxy server check box, and then type the user name, domain, and password of the user in the corresponding boxes. If you want to enable basic authentication for the user connecting to the proxy server, select the Allow basic authentication (password in cleartext) check box. 8. Click OK to save these settings.
Next Step
Step 4: Configure Updates and Synchronization
To start the WSUS Administration Console
To specify an update source and proxy server
15
Additional Resources
Windows Server Update Services 3.0 SP2 Step By Step Guide
Step 4: Configure Updates and Synchronization
This section describes how to configure a set of updates that you want to download by using Windows Server Update Services 3.0 Service Pack 2 (WSUS 3.0 SP2).
Step 4 Procedures
You can do these procedures by using either the WSUS Configuration Wizard or the WSUS Administration Console. 1. Save and download information about your upstream server and proxy server. 2. Choose the language of the updates. 3. Select the products for which you want to receive updates. 4. Choose the classifications of updates. 5. Specify the synchronization schedule for this server. After you configure the network connection, you can download updates by synchronizing the WSUS server. Synchronization begins when the WSUS server contacts Microsoft Update. After the WSUS makes contact, WSUS determines whether any new updates have been made available since the last time you synchronized. When you synchronize the WSUS server for the first time, all the updates are available and are ready for your approval for installation. The initial synchronization may take a long time. The procedures in this section describe synchronizing with the default settings. WSUS 3.0 SP2 also includes options that enable you to minimize bandwidth use during synchronization.
If You Are Using the Windows Server Update Services Configuration Wizard
In the step 3 procedures, you completed configuration of the upstream server and the proxy server. This next set of procedures starts on the Connect to Upstream Server page of that configuration wizard.
1. On the Connect to Upstream Server page of the configuration wizard, click the Start Connecting button. This both saves and uploads your settings and collects information about available updates.
To save and download your upstream server and proxy information
16
2. While the connection is being made, the Stop Connecting button will be available. If there are problems with the connection, click Stop Connecting, fix the problems, and restart the connection. 3. After the download has completed successfully, click Next.
1. The Choose Languages page lets you receive updates from all languages or from a subset of languages. Selecting a subset of languages will save disk space, but it is important to choose all of the languages that will be needed by all the clients of this WSUS server. If you choose to get updates only for specific languages, select Download updates only in these languages, and select the languages for which you want updates. 2. Click Next.
1. The Choose Products page lets you specify the products for which you want updates. Select product categories, such as Windows, or specific products, such as Windows Server 2008. Selecting a product category will cause all the products in that category to be selected. 2. Click Next.
1. The Choose Classifications page allows you to specify the update classifications you want to obtain. Choose all the classifications or a subset of them. 2. Click Next
1. On the Set Sync Schedule page, you choose whether to perform synchronization manually or automatically. If you choose Synchronize manually, you must start the synchronization process from the WSUS Administration Console. If you choose Synchronize automatically, the WSUS server will synchronize at set intervals. Set the time of the First synchronization and specify the number of Synchronizations per day that you want this server to perform. For example, if you specify that there should be four synchronizations per day, starting at 3:00 A.M., synchronizations will occur at 3:00 A.M., 9:00 A.M., 3:00 P.M., and 9:00 P.M. 2. Click Next.
3. On the Finished page, you can start the WSUS Administration Console by leaving the Launch the Windows Server Update Services Administrations snap-in check box
To choose update languages
To choose update products
To choose update classifications
To configure the synchronization schedule
17
selected, and you can start the first synchronization by leaving the Begin initial synchronization check box selected. 4. Click Finish.
Important You cannot save configuration changes that are made while the server is synchronizing. Wait until synchronization is finished and then make your changes.
If You Are Using the WSUS Administration Console
The following procedures explain how to perform the configuration steps by using the WSUS Administration Console.
1. In the Options panel, click Products and Classifications. A dialog box appears with Products and Classifications tabs. 2. In the Products tab, select the product category or specific products for which you want this server to receive updates, or else select All Products. 3. In the Classifications tab, select the update classifications you want, or else select All Classifications. 4. Click OK to save your selections.
1. In the Options panel, click Update Files and Languages. A dialog box appears with Update Files and Update Languages tabs. 2. In the Update Files tab, choose whether to Store update files locally on this server or to have all client computers install from Microsoft Update. If you decide to store update files on this server, you also decide whether to download only those updates that are approved or to download express installation files. 3. In the Update Languages tab, if you are storing update files locally, you choose to Download updates for all languages (the default), or to Download updates only in the specified languages. If this WSUS server has downstream servers, they will receive updates only in the languages specified by the upstream server. 4. Click OK to save these settings.
1. In the Options panel, click Synchronization Schedule.
2. In the Synchronization Schedule tab, you choose whether to perform synchronization
To choose products and update classifications
To choose update files and languages
To synchronize the WSUS server
18
manually or automatically. If you choose Synchronize manually, you will have to start the synchronization process from the WSUS Administration Console. If you choose Synchronize automatically, the WSUS server will synchronize at set intervals. Set the time of the First synchronization and specify the number of Synchronizations per day that you want this server to perform. For example, if you specify that there should be four synchronizations per day, starting at 3:00 A.M., synchronizations will occur at 3:00 A.M., 9:00 A.M., 3:00 P.M., and 9:00 P.M. 3. Click OK to save your selections. 4. In the navigation pane of the WSUS Administration Console, select Synchronizations. 5. Right-click or move to the Actions pane on the right side, and then click Synchronize Now. If you do not see the Actions pane on the right side of the console, on the console toolbar click View, click Customize, and ensure that the Action pane check box is selected. 6. After the synchronization is complete, in the left panel, click Updates to view the list of updates.
Next Step
Step 5: Configure Client Updates
Additional Resources
Windows Server Update Services 3.0 SP2 Step By Step Guide
Step 5: Configure Client Updates
In Windows Server Update Services 3.0 (WSUS 3.0 SP2), the WSUS Setup automatically configures IIS to distribute the latest version of Automatic Updates to each client computer that contacts the WSUS server. The best way to configure Automatic Updates depends on the network environment. In an environment that uses Active Directory directory service, you can use an existing domain–based Group Policy object (GPO) or create a new GPO. In an environment without Active Directory, use the Local GPO. In this step, you will configure Automatic Updates and then point the client computers to the WSUS server. The following procedures assume that your network runs Active Directory. These procedures also assume that you are familiar with Group Policy and use it to manage the network.
For more information about Group Policy, refer to the Group Policy Tech Center Web site at http://go.microsoft.com/fwlink/?LinkID=47375.
19
Step 5 Procedures
In step 4, you completed configuration of the updates that you want to download. Use this set of procedures to configure automatic updates for client computers. 1. Configure Automatic Updates in Group Policy. 2. Point a client computer to the WSUS server. 3. Manually start detection by the WSUS server. Perform the first two procedures on the domain–based GPO of your choice, and the third procedure at a command prompt on the client computer.
1. In the Group Policy Management Console (GPMC), browse to the GPO on which you want to configure WSUS, and then click Edit. 2. In the GPMC, expand Computer Configuration, expand Administrative Templates, expand Windows Components, and then click Windows Update. 3. In the details pane, double-click Configure Automatic Updates. 4. Click Enabled, and then click one of the following options: Notify for download and notify for install. This option notifies a logged-on administrative user before the download and before you install the updates. Auto download and notify for install. This option automatically begins downloading updates and then notifies a logged-on administrative user before installing the updates. Auto download and schedule the install. This option automatically begins downloading updates and then installs the updates on the day and time that you specify. Allow local admin to choose setting. This option lets local administrators to use Automatic Updates in Control Panel to select a configuration option. For example, they can choose their own scheduled installation time. Local administrators cannot disable Automatic Updates. 5. Click OK.
1. In the Windows Update details pane, double-click Specify intranet Microsoft update service location.
2. Click Enabled, and type the HTTP URL of the same WSUS server in the Set the intranet update service for detecting updates box and in the Set the intranet statistics server box. For example, type http://servername in both boxes, and then click
To configure Automatic Updates
To point the client computers to the WSUS server
20
OK.
Note If you are using the Local GPO to point the computer to WSUS, this setting takes effect immediately, and this computer appears in the WSUS Administrative Console after a short time. You can speed up this process by manually initiating a detection cycle. After you set up a client computer, it will take several minutes before the computer appears on the Computers page in the WSUS Administration Console. For client computers configured with a domain-based Group Policy, it can take about 20 minutes after Group Policy refreshes (that is, applies any new policy settings to the client computer). By default, Group Policy updates in the background every 90 minutes, with a random offset of 0–30 minutes. If you want to update Group Policy sooner, you can go to a command prompt on the client computer and type gpupdate /force. For client computers configured by using the Local GPO, Group Policy is applied immediately, and the update takes about 20 minutes. If you begin detection manually, you do not have to wait 20 minutes for the client computer to contact WSUS.
1. On the client computer, click Start, and then click Run. 2. Type cmd in the Open box, and then click OK. 3. At the command prompt, type wuauclt.exe /detectnow. This command-line option instructs Automatic Updates to contact the WSUS server immediately.
Next Step
Step 6: Configure Computer Groups
Additional Resources
Windows Server Update Services 3.0 SP2 Step By Step Guide
Step 6: Configure Computer Groups
Computer groups are an important part of Windows Server Update Services 3.0 Service Pack 2 (WSUS 3.0 SP2) deployments. Computer groups permit you to test updates and target updates to specific computers. There are two default computer groups: All Computers and Unassigned Computers. By default, when each client computer first contacts the WSUS Server, the server adds that client computer to both of these groups.
To manually start detection by the WSUS server
21
You can create as many custom computer groups as you need to manage updates in your organization. As a best practice, create at least one computer group to test updates before you deploy them to other computers in your organization.
Step 6 Procedures
1. Create a test computer group. 2. Move at least one computer into the test group.
1. In the WSUS Administration Console, expand Computers and select All Computers. 2. Right-click All Computers and click Add Computer Group. 3. In the Add Computer Group dialog box, specify the Name of the new test group and click Add.
In the next procedure, you will assign a client computer to the test group. A test computer is any computer that has software and hardware that is consistent with the majority of client computers on the network, yet not assigned to a critical role. After your tests are successful, you can approve the updates for computers in the groups of your choice.
1. In the WSUS Administration Console, click Computers. 2. Click the group of the computer that you want to assign to the test group. 3. In the list of computers, select the computer or computers that you want to assign to the test group. 4. Right-click Change Membership. 5. In the Set Computer Group Membership dialog box, select the test group that you created previously, and then click OK.
Repeat these two procedures, that is, create a group and then assign computer(s) to the group, to create as many additional computer groups as needed to manage updates at your site.
Next Step
Step 7: Approve and Deploy WSUS Updates
Additional Resources
Windows Server Update Services 3.0 SP2 Step By Step Guide
To create a test group
To assign a computer to the test group
22
Step 7: Approve and Deploy WSUS Updates
In this step, you approve an update for any computers in the test group for Windows Server Update Services 3.0 Service Pack 2 (WSUS 3.0 SP2). Computers in the group automatically contact the WSUS server over the next 24 hours to obtain the update. You can use the WSUS reporting feature to determine whether those updates were deployed to the test computers. When the tests are successfully completed, you can then approve the updates for the applicable computer groups in your organization.
Step 7 Procedures
Approve and deploy an update. Check the status of an update.
1. On the WSUS Administration Console, click Updates. An update status summary is displayed for All Updates, Critical Updates, Security Updates, and WSUS Updates. 2. In the All Updates section, click Updates needed by computers. 3. On the list of updates, select the updates that you want to approve for installation on your test computer group. Information about a selected update is available in the bottom pane of the Updates panel. To select multiple contiguous updates, hold down the SHIFT key while clicking updates; to select multiple noncontiguous updates, press down the CTRL key while clicking updates. 4. Right-click the selection and click Approve. 5. In the Approve Updates dialog box, select your test group, and then click the down arrow. 6. Click Approved for Install and then click OK. 7. The Approval Progress window appears which shows progress of the tasks that affect update approval. When approval is completed, click Close.
After 24 hours, you can use the WSUS Reports feature to determine whether the updates were deployed to the test group computers.
1. In the navigation pane of the WSUS Administration Console, click Reports. 2. On the Reports page, click the Update Status Summary report. The Updates Report window appears. 3. If you want to filter the list of updates, select the criteria that you want to use, for example, Include updates in these classifications, and then click Run Report on the window's toolbar.
To approve and deploy an update
To check the status of an update
23
4. You will see the Updates Report pane. You can check the status of individual updates by selecting the update in the left section of the pane. The last section of the report pane shows the status summary of the update. 5. You can save or print this report by clicking the applicable icon on the toolbar. 6. After you test the updates, you can approve the updates for installation on the applicable computer groups in your organization.
Additional resources
Windows Server Update Services 3.0 SP2 Step By Step Guide For more information about how to use WSUS 3.0 SP2, see:
The WSUS Deployment Guide at http://go.microsoft.com/fwlink/?LinkId=139832.
The WSUS Operations Guide at http://go.microsoft.com/fwlink/?LinkId=139838
No comments:
Post a Comment