Monday, October 17, 2011
Monday, October 3, 2011
DNS (Domain Name System), is the service which translates between Internet names and Internet addresses.
Internet names are the names which we use to refer to hosts on the Internet, such as www.debianhelp.co.uk.
Internet addresses are the numbers which routers use to move traffic across the Internet, such as 211.1.13.115 and
What are DNS Records ?
DNS records or Zone files are used for mapping URLs to an IPs. Located on servers called the DNS servers, these records are typically the connection of your website with the outside world. Requests for your website are forwarded to your DNS servers and then get pointed to the WebServers that serve the website or to Email servers that handle the incoming email.
Different Types of DNS Records With Syntax and Examples
Types of DNS Records
A
AAAA
CNAME
MX
PTR
NS
SOA
SRV
TXT
NAPTR
The above DNS records are mostly used in all DNS Configurations. Now we will see each one with examples.
A Record
An A record or address record.
Address Record, assigns an IP address to a domain or subdomain name. When the domain name system was designed it was recommended that no two A records refer to the same IP address.
Suppose you have the somedomain.tld domain and want to assign 10.10.0.1 IP address to your web server, then you should create an A record with "www.somedomain.tld" as Fully Qualified Domain Name and "10.10.0.1" in the value field.
From now on, all the requests for www.somedomain.tld will be sent to a server with that IP.
Basically is useful to use an A record when you have subdomains residing on various systems.
Usefultip: you might use a "*.somedomain.tld" A record to allow WHATEVER.somedomain.tld to be resolved to your IP, though a wildcard CNAME record is often better than a wildcard A record.
Example of A Record with Syntax
example.com. IN A 69.9.64.11
Where
IN indicates Internet
A indicates the Address record.
The above example indicate that the IP Address for the domain example.com is 69.9.64.11
AAAA Record
An AAAA record or IPv6 address record maps a hostname to a 128-bit IPv6 address.
The regular DNS Address resource record is defined for a 32-bit IPv4 address, so a new one was created to allow a domain name to be associated with a 128-bit IPv6 address. The four “A”s (“AAAA”) are a mnemonic to indicate that the IPv6 address is four times the size of the IPv4 address. The AAAA record is structured in very much the same way as the A record in both binary and master file formats; it is just much larger. The DNS resource record Type value for AAAA is 28.
Example of AAAA Record with Syntax
The AAAA record is to help transition and coexistence between IPv4 and IPv6 networks.An IPv4 nameserver can provide IPv6 addresses:
linux aaaa 3ffe:1900:4545:2:02d0:09ff:fef7:6d2c
CNAME Record
A CNAME record or canonical name record makes one domain name an alias of another. The aliased domain gets all the subdomains and DNS records of the original.
You should use a CNAME record whenever you want associate a new subdomain to an already existing A record; i.e. you can make "www.somedomain.tld" to "somedomain.tld", which should already have been assigned an IP with an A record.
This allows you to have as many subdomains as you wish without having to specify the IP for every record. Use a CNAME if you have more services pointing to the same IP. This way you will have to update only one record in the convenience of a change of IP address.
Example of a CNAME record: "stuff.everybox.com CNAME www.everybox.com" where 'www.everybox.com' is an A record listing an IP address, and 'stuff.everybox.com' points to 'www.everybox.com'. It will NOT allow you to foward a domain to a specific web page. Use a webhop for that. Port numbers can be changed with webhops, as well; CNAMEs cannot change the HTTP default of 80 to any other port number.
Do not use CNAME defined hostnames in MX records. For example, this is not recommended
Example Of CNAME With syntax
mail.example.com IN CNAME mail.example.net
where
IN indicates Internet
CNAME indicates CNAME record.
MX Record
An MX record or mail exchange record maps a domain name to a list of mail exchange servers for that domain.
Example with MX Record Syntax - Single mail servers
mydomain.com. 14400 IN MX 0 mydomain.com.
The MX record shows that all emails @ mydomain.com should be routed to the mail server at mydomain.com. The DNS record shows that mydomain.com is located at 26.34.9.14. This means that email meant for test@mydomain.com will be routed to the email server at 26.34.9.14. This finishes the task of the MX record. The email server on that server then takes over, collects the email and then proceeds to distribute it to the user ``test''.
It is important that there be a dot(``.'') after the domain name in the MX record. If the dot is absent, it routes to ``mydomain.com.mydomain.com''. The number 0, indicates Preferance number. Mail is always routed to the server which has the lowest Preferance number. If there is only one mail server, it is safe to mark it 0.
Using Multiple mail servers
If you want to use multiple mail servers you have to use MX record preferences.The MX record preference values indicate which mail server to use and in which order to try them when they fail or don't respond. A larger preference number is less preferred. Thus, a mail exchanger with a preference of zero (0) is always preferred over all other mail exchangers. Setting preference values to equal numbers makes mail servers equally preferred.
Example with MX Record Syntax - Multiple mail servers
mydomain.com. 14400 IN MX 0 mydomain.com.
mydomain.com. 14400 IN MX 30 server2.mydomain.com
You can have unlimited MX entries for Fallback or backup purpose.If all the MX records are equal Preference numbers, the client simply attempts all equal Preference servers in random order, and then goes to MX record with the next highest Preference number.
PTR Record
A PTR record or pointer record maps an IPv4 address to the canonical name for that host. Setting up a PTR record for a hostname in the in-addr.arpa domain that corresponds to an IP address implements reverse DNS lookup for that address. For example www.name.net has the IP address 122.0.3.16, but a PTR record maps 16.3.0.122.in-addr.arpa.
Example of PTR Record with syntax
16.3.0.122.in-addr.arpa. IN PTR name.net
Here as you see the IP Address is reversed and added with in-addr.arpa and this has come to the left side while the actual domain name has gone to right side of IN PTR.
This is mostly used as a security and an anti-spam measure wherein most of the webservers or the email servers do a reverse DNS lookup to check if the host is actually coming from where it claims to come from. It is always advisable to have a proper reverse DNS record (PTR) is been setup for your servers especially when you are running a mail / smtp server.
NS Record
An NS record or name server record maps a domain name to a list of DNS servers authoritative for that domain. Delegations depend on NS records.
NS Record Name Server Record which indicates the Authoritative Name Servers for a particular Domain. The NS records of the Authoritative Name Server for any given Domain will be listed on the Parent Server. These are called as the Delegation Records as these records on the Parent Server indicates the delegation of the domain to the Authoritative servers.
The NS record will also be listed in the Zone records of the Authoritative Name Server itself. These records are called as the Authoritative Records.
The NS records found on the Parent Server should match the NS records on the Authoritative Server as well. However, you can have NS records listed on the Authoritative server that is not listed in the Parent Server. This arrangement is normally used to configure Stealth Name Servers.
Example of NS Record With syntax
example.com. IN NS ns1.live.secure.com.
where
IN indicates the Internet
NS indicates the type of record which Name Server record
The above indicates that the ns1.live.secure.com is the authoritative server for the domain example.com
SOA Record
An SOA record or start of authority record specifies the DNS server providing authoritative information about an Internet domain, the email of the domain administrator, the domain serial number, and several timers relating to refreshing the zone.
An SOA(State of Authority) Record is the most essential part of a Zone file. The SOA record is a way for the Domain Administrator to give out simple information about the domain like, how often it is updated, when it was last updated, when to check back for more info, what is the admins email address and so on. A Zone file can contain only one SOA Record.
A properly optimized and updated SOA record can reduce bandwidth between nameservers, increase the speed of website access and ensure the site is alive even when the primary DNS server is down.
Example of SOA Record with syntax
Here is the SOA record. Notice the starting bracket ``(``. This has to be on the same line, otherwise the record gets broken.
; name TTL class rr Nameserver email-address
mydomain.com. 14400 IN SOA ns.mynameserver.com. root.ns.mynameserver.com. (
2004123001 ; Serial number
86000 ; Refresh rate in seconds
7200 ; Update Retry in seconds
3600000 ; Expiry in seconds
600 ; minimum in seconds )
name - mydomain.com is the main name in this zone.
TTL - 14400 - TTL defines the duration in seconds that the record may be cached by client side programs. If it is set as 0, it indicates that the record should not be cached. The range is defined to be between 0 to 2147483647 (close to 68 years !) .
Class - IN - The class shows the type of record. IN equates to Internet. Other options are all historic. So as long as your DNS is on the Internet or Intranet, you must use IN.
Nameserver - ns.nameserver.com. - The nameserver is the server which holds the zone files. It can be either an external server in which case, the entire domain name must be specified followed by a dot. In case it is defined in this zone file, then it can be written as ``ns'' .
Email address - root.ns.nameserver.com. - This is the email of the domain name administrator. Now, this is really confusing, because people expect an @ to be in an email address. However in this case, email is sent to root@ns.nameserver.com, but written as root.ns.nameserver.com . And yes, remember to put the dot behind the domain name.
Serial number - 2004123001 - This is a sort of a revision numbering system to show the changes made to the DNS Zone. This number has to increment , whenever any change is made to the Zone file. The standard convention is to use the date of update YYYYMMDDnn, where nn is a revision number in case more than one updates are done in a day. So if the first update done today would be 2005301200 and second update would be 2005301201.
Refresh - 86000 - This is time(in seconds) when the slave DNS server will refresh from the master. This value represents how often a secondary will poll the primary server to see if the serial number for the zone has increased (so it knows to request a new copy of the data for the zone). It can be written as ``23h88M'' indicating 23 hours and 88 minutes. If you have a regular Internet server, you can keep it between 6 to 24 hours.
Retry - 7200 - Now assume that a slave tried to contact the master server and failed to contact it because it was down. The Retry value (time in seconds) will tell it when to get back. This value is not very important and can be a fraction of the refresh value.
Expiry - 3600000 - This is the time (in seconds) that a slave server will keep a cached zone file as valid, if it can't contact the primary server. If this value were set to say 2 weeks ( in seconds), what it means is that a slave would still be able to give out domain information from its cached zone file for 2 weeks, without anyone knowing the difference. The recommended value is between 2 to 4 weeks.
Minimum - 600 - This is the default time(in seconds) that the slave servers should cache the Zone file. This is the most important time field in the SOA Record. If your DNS information keeps changing, keep it down to a day or less. Otherwise if your DNS record doesn't change regularly, step it up between 1 to 5 days. The benefit of keeping this value high, is that your website speeds increase drastically as a result of reduced lookups. Caching servers around the globe would cache your records and this improves site performance.
SRV Record
The theory behind SRV is that given a known domain name e.g. example.com, a given service e.g. web (http) which runs on tcp in this case, a DNS query may be issued to find the host name that provides such on behalf of the domain - and which may or may not be within the domain.
Example of SRV Record with syntax
srvce.prot.name ttl class rr pri weight port target
_http._tcp.example.com. IN SRV 0 5 80 www.example.com.
srvce
Defines the symbolic service name (see IANA port-numbers) prepended with a '_' (underscore). Case insensitive. Common values are:
_http - web service
_ftp - file transfer service
_ldap - LDAP service
prot
Defines the protocol name (see IANA service-names) prepended with a '_' (underscore). Case insensitive. Common values are
_tcp - TCP protocol
_udp - UDP protocol
name
Incomprehensible description in RFC 2782. Leaving the entry blank (without a dot) will substitute the current zone root (the $ORIGIN), or you can explicitly add it as in the above _http._tcp.example.com. (with a dot).
ttl
Standard TTL parameter. For more information about TTL values.
pri
The relative Priority of this service (range 0 - 65535). Lowest is highest priority.
weight
Used when more than one service with same priority. A 16 bit unsigned integer in the range 0 - 65535. The value 0 indicates no weighting should be applied. If the weight is 1 or greater it is a relative number in which the highest is most frequently delivered i.e. given two SRV records both with Priority = 0, one with weight = 1 the other weight = 6, the one with weight 6 will have its RR delivered first 6 times out of 7 by the name server.
port
Normally the port number assigned to the symbolic service but does this is not a requirement e.g. it is permissible to define a _http service with a port number of 8100 rather than the more normal port 80.
target
The name of the host that will provide this service. Does not have to be in the same zone (domain).
TXT Record
A TXT record allows an administrator to insert arbitrary text into a DNS record. For example, this record is used to implement the Sender Policy Framework specification.
Example of TXT Record with syntax
SPF domains have to publish at least two directives: a version identifier and a default mechanism.
mydomain.com. TXT "v=spf1 -all"
This is the simplest possible SPF record: it means your domain mydomain.com never sends mail.
It makes sense to do this when a domain is only used for web services and doesn't do email.
MX servers send mail, designate them.
mydomain.com. TXT "v=spf1 mx -all"
Let's pretend mydomain.com has two MX servers, mx01 and mx02. They would both be allowed to send mail from mydomain.com.
other machines in the domain also send mail, designate them.
mydomain.com. TXT "v=spf1 mx ptr -all"
This designates all the hosts whose PTR hostname match mydomain.com.
any other machines not in the domain also send mail from that domain, designate them.
mydomain.com. TXT "v=spf1 a:mydomain.com mx ptr -all"
mydomain.com's IP address doesn't show up in its list of MX servers. So we add an "a" mechanism to the directive set to match it.
mydomain.com. TXT "v=spf1 a mx ptr -all"
This is shorthand for the same thing.
Each of your mail servers should have an SPF record also.When your mail servers create a bounce message, they will send it using a blank envelope sender: <>. When an SPF MTA sees a blank envelope sender, it will perform the lookup using the HELO domain name instead. These records take care of that scenario.
amx.mail.net. TXT "v=spf1 a -all"
mx.mail.net. TXT "v=spf1 a -all"
NAPTR Record
NAPTR records (NAPTR stands for "Naming Authority Pointer") are a newer type of DNS record that support regular expression based rewriting.
Example of NAPTR Record with syntax
$ORIGIN 3.8.0.0.6.9.2.3.6.1.4.4.e164.arpa.
NAPTR 10 100 "u" "E2U+sip" "!^.*$!sip:info@example.com!" .
NAPTR 10 101 "u" "E2U+h323" "!^.*$!h323:info@example.com!" .
NAPTR 10 102 "u" "E2U+msg" "!^.*$!mailto:info@example.com!" .
This record set maps the phone number +441632960083 onto three possible identically ordered URIs, with a preference for SIP, then H323, and finally email. In each case, the regular expression matches the full AUS (^.$), and replaces it with a URI (e.g., sip:info@example.com). As this is a terminal record, this URI is returned to the client.Though most NAPTR records replace the full AUS, it is possible for the regular expression to back-reference part of the AUS, to grab an extension number, say:
$ORIGIN 0.6.9.2.3.6.1.4.4.e164.arpa. *
NAPTR 10 100 "u" "E2U+sip""!^+441632960(.*)$!sip:\1@example.com!" .
Once the client has the URI it must be resolved using DNS, but this is no longer part of the DDDS algorithm..
wildcard DNS record
A wildcard DNS record is a record in a DNS zone file that will match all requests for non-existent domain names, i.e. domain names for which there are no records at all.
http://who.is
Ex:http://who.is/dns/kapilhomes.com/
To check the DNS
What's My DNS?
whatsmydns.net is an online service that allows you to instantly perform a DNS lookup to check a hostnames current IP Address and other DNS information against a selection of random name servers around the world. This is especially useful to check the current state of DNS propagation after making changes to your domains zones.
http://www.whatsmydns.net/#CNAME/mail.kapilhomes.com
To check all the records propagation.
Thursday, September 29, 2011
Snapshot Backup - FAQ
How can I verify that Snapshot did what it claimed - backup all my data
The easiest and fastest way:
Backup a drive. Map the drive as virtual drive. Use WINDIFF or similar file compare tools to compare the two drives; they should be identical.
You will see differences, because WINDIFF will not be able to open the PAGEFILE or registry files on the original drive; but that's not SNAPSHOT's fault. For these files you have to trust us (of course we tested this, using slightly more complicated setup's)
Do I have to shut down all Windows programs (highly recommended)
No. It's probably a good idea to save your open files before starting Snapshot Backup. Otherwise you would eventually get outdated data on your disk. After Snapshot has started you may continue to work normally, the image will reflect the data at start time.
May I install a new VIRUS, while Snapshot is running?
Yes. It won't make you happy, but Snapshot won't care. The created image will not contain any sign of a virus, ready to be restored.
May I FORMAT/FDISK the disk that is currently being Snapshot'ed?
No. It is not possible to run programs that access the disk directly while Snapshot is running.
What File systems does Snapshot support?
SnapShot relies mostly on the operating system to support a drive. All file systems known to Windows(FAT16, FAT32, NTFS) are supported; additionally some LINUX file systems (EXT2,EXT3,Reiser) are 'manually' supported.
Other file system are stored completely, ignoring any free space information.
Does Snapshot support enhanced NTFS features like encryption, security, hard and symbolic links, mount points, multiple data streams, extended attributes,quota,...
Yes. Snapshot is sector-oriented. Snapshot will backup all sectors relevant for the file system, and restore them exactly the same way. Snapshot never interprets these data on its own, the interpretation of these data is up to the file system. Snapshot only provides the necessary data. The same is true for the Image Viewer.
--------------------------------------------------------------------------------
Snapshot - Remote Backup
--------------------------------------------------------------------------------
As a System administrator, keeping disk images for many computers current can be quite time consuming.
Due to Drive Snapshot's easy command line interface, this can be done much more easily.
Using RLOGIN/RCONSOLE from the Windows NT Resource pack, or the ingenious PSEXEC utility from Sysinternals, you can easily automate this process, or control it from your own working place.
Example for PSEXEC:
C::\>PSEXEC \\userComputer -u administrator -p AdminPasswd
-c -f -h c:\Programme\snapshot\Snapshot.exe C: \\Server\Backup\user\C-drive.SNA
This will:
login to the computer 'Usercomputer' as an administrator (required); copy Snapshot.exe to the other computer, and start a backup of the C:-drive to some space on your \\Server.
Please see PSEXEC documentation for more details.
Note: when backing up a Vista or Windows 7 computer, please use
-h If the target system is Vista or higher, has the process
run with the account's elevated token, if available.
Otherwise you will get a UAC (User Account Control) prompt that no one is able to answer.
Snapshot - command line options
Well - having a nice Windows interface is a fine thing - unless you want to automate certain things, which often is sheer impossible with all this Windows wizardry, often requiring dozens of clicks to accomplish even trivial tasks - just try to automate a Backup of your data with your favourite CD-ROM burning program.
Drive Snapshot has a very easy command line interface:
Backup Drive to file
C:\> SNAPSHOT C: X:\C-Drive.sna
this will backup the C: drive to X:\C-Drive.SNA.
To save several Volumes, simply create a Batch file like
SNAPSHOT C: \\Server\Backups\C-Drive.sna
SNAPSHOT D: \\Server\Backups\D-Drive.sna
SNAPSHOT E: \\Server\Backups\E-Drive.sna
This will backup C:, D:, E: to your server..
Option -L650
Most of the time, it's sensible to limit the size of a single image file to some maximum value, so it can be written to a CD-ROM. The default maximum size is 650MB; you can change this with the -L parameter.
To avoid trouble with DOS when restoring your drives, you should keep this below 2 GB.
Option -Ssize
Equivalent to Bytemode of Advanced Options.
-S0 -- always use Bytemode.
-S8192 -- use Bytemode, if clustersize is >= 8192
-S100000 -- never use Bytemode (default)
Option -R [empty Recycle bin ]
This will empty the Recycle Bin for this drive before starting the backup.
Option -W [Wait]
If the cursor is in the top left corner at the time of start, Snapshot assumes it has been started from a batchfile, and waits for the key at end, so you can control the execution.
This is probably unwanted, if it was started from the scheduler.
This WaitForAnyKey can be suppressed with -W.
Option -G [Graphical]
For those who have created a shortcut to a customized Snapshot command, but still want to see a graphical progress.
Useful if you have configured a shortcut or similar for automatic backup, telling the user 'Click here to backup your drive'.
It has a few sub modes like
-G show progress, wait for user to click [exit] when done
-Go show progress, exit when done if everything worked, else tell him so
-Gx show progress, always exit when done
Option -T [Test]
You can request a test of the image for validity, after it has been created.
This will completely reread the image and check its consistency, checksums,...
However (in particular in batchfiles) it's probably better to test the image separately ;like
snapshot x:\image.sna -T
so you can know whether a failure was due to the destination server being down, or 'unreliable data written'.
Any failure will be returned as Errorlevel > 0.
Differential Backups
please see differential.htm for detail
Set a Default Password from command line
-PW=MySuperSecretPassword
This password will be used for backup, restore, and mount from now on. Restore and mount will ask for the password, should it be needed.
Restoring a Volume
C:\> SNAPSHOT X:\D-Drive.sna D:
restores the D: drive from X:\D-Drive.sna. This will overwrite all data on the D: drive !!
The limitations are identical to the normal Snapshot Restore.
Setting the password from the command line
From the command line, you can set the password with -PW=
C:>Snapshot C: X:\Backup\c-drive.sna -PW=SuperSecret
This overrides a default password for this command only.
If you have a default password, and don't set one from the command line, the default is used.
If you have a default, but nevertheless don't want your image encrypted, you have to indicate an empty password:
C:>Snapshot C: X:\Backup\c-drive.sna -PW=
Excluding files/directories from backup
In some cases it can be useful to exclude some files or directories from backup.
That's always the case for (and is always done automagically) for PAGEFILE.SYS and HIBERFIL.SYS, but can also be useful for temporary files, big movie archives (which you have on the bought DVD anyway and similar stuff.
Due to technical reasons, the data in excluded files are not saved, but the directory entries ARE saved. Therefore, both when viewing the backup, and after restoring, the files *look* intact, but contain all zero's (when viewing) or random data (after restore).
For this reason, the image contains a fresh created Batch job 'SnapshotDeleteAfterRestore.BAT'.
After restore it should be executed to avoid possible confusion (it will delete all unsaved files).
Files and directories can be excluded by
--exclude:\Temp
--exclude:\Temp\* (which is equivalent)
--exclude:\Windows\Memory.dmp
options can be concatenated with commas like
--exclude:\Temp,\Windows\Memory.dmp,\Windows\Minidump\*,"\Documents and Settings"
,"\Program Files",\Windows\$NtUninstall* (1.38)
Note:
\temp and \temp\* are equivalent
Spaces in Filenames have to be enclosed by `"`
Subdirectories are also always excluded.
Creation of filenames with date, weekday, ...
Some 'magic' strings in the command line are replaced with the data, computer name, disk, etc.
So it makes sense to
c:\>snapshot C: \\server\backups\$computername\$DISK-$DATE.sna
$date Date 6-digit YYMMDD
$computername Computer name
$type for differential Images --> 'dif'
$disk the drive letter (C,D,...)
$weekday weekday, 2 letters
$year year (4 digits)
$month month (1..12)
$day day in month (1..31)
Mount a disk Image as virtual drive
C:\> SNAPSHOT X:\C-Drive.sna Z: -V
mounts the image X:\C-Drive.SNA as drive Z:
with a couple of variants:
-VM just mount the image, don't start Explorer
to be used in batch files
-VQ Z: mounts the volume, doesn't show any dialog
-!unmount:Z unmount Z:
-!unmount unmount all mounted drives (from 1.38)
Snapshot should be started with 'start' like
start Snapshot x:\image.bat Z: -vq
xcopy z:\Data c:\Data
Snapshot -!unmount:Z
Drive Snapshot 1.39 supports additionally File Extensions
--exclude:"\*.MP3,\*.TMP"
works as expected
[1.39]reparing damaged images
Unfortunately, images can be damaged. Some image sub-files may be missing or unreadable, data may be damaged, etc., and the image isn't mountable any longer.
As a disk image, this is useless as you will never know what data are missing.
But often all you need is a few files from the image. If the .SNA file is existing,
c:>snapshot x:\DAMAGED.SNA --repair:Y:\REPAIRED.SNA
will try to reconstruct something mountable; at least after running CHKDSK over the virtual drive you should be able to retrieve some data.
[1.39]Migration on different hardware
If you restore using VistaPE/BartPE, running
c:>snapshot --AddDriver
will ask you for the driver to be installed, and the location of the (restored) Windows, and install this driver as an additional disk driver
more special Options
snapshot --? shows all (documented ;) special commands
--unmount - unmount all virtual disks and terminate snapshot started with -VQ
--unmount:Z - unmount virtual disk Z
--resize X: - show possible resize range for drive X:
--resize X: 1000 - (try to) resize drive X: to 1000 MB
--resizepart X: 1000 - (try to) grow partition and filesystem to 1000 MB
resizepart is unable to shrink partitions or filesystems!
--exec:RestartExchange.Bat
--exec:"NET START ORACLE" - execute commands as soon as backup really started
MUST be the last option on the command line!
--ClearSignature HD1
--SetSignature HD1 01234567
--Checkboot HD1 - test if HD1 seems to be bootable
--Activate X: set active flag for drive X:
--Deactivate X: clear active flag for drive X:
--RestoreMBR HD1 filename - writes the MBR from filename to HD1
--RestorePartitionStructure HD1 filename -
writes the partition information from filename to HD1
--exclude:filename1,filename2,... excludes all given filenames from backup
--exclude:@filename.txt exclude from file filename.txt
--LogFile:filename.log - append log output to file filename.log
--DontLogStdout - don't write VSS log output to standard output
--DontLogProgress - don't write the progress report lines to stderr
--novss - don't use the volume shadow service (more about VSS)
--usevss - use the volume shadow service if available
--forcevss - use the volume shadow service. If not available exit with error.
--register:License.lic - register snapshot
--setdefaultpwd=MyPassword - sets the default password to MyPassword
--SearchFull:path1,path2,path3 while working with differential images
search the full image in the given path.
--------------------------------------------------------------------------------
Subscribe to:
Posts (Atom)